Skip to product information
1 of 3

Water Solenoid Valve for 1/2" Outlets

Water Solenoid Valve for 1/2" Outlets

Regular price $8.00 USD
Regular price Sale price $8.00 USD
Sale Sold out
Shipping calculated at checkout.

Control the water flow using this electromagnetic inlet valve and build your own gardening solution. The valve is normally closed, is rated for 12 V and has a typical current draw of  around 300 mA. You can drive this solenoid using e.g. your Arduino board or Raspberry Pi and our MOSFET Breakout. This module has an 1/2" thread on both ends.

Please make sure that the water temperature doesn't exceed 55˚C and that the water pressure is at least 20 kPa or 0.2 bar. Normally, taps have a pressure of at least 1 bar.

View full details